Vitek VT-1459, Manual Instruction

Page: 5 / 24

5
ENGLISH
• Clean the motor unit (7) with a soft, slightly
damp cloth and then wipe it dry.
• Do not use coarse sponges, abrasives and
solvents to clean the blender.
• Do not immerse the blender motor unit (7)
into any liquids; do not wash it in a dish-
washing machine.
• Install the sealing gasket (5) into the knife
block (6).
• Install the knife block (6) into the blender bowl
(3) and thread it rotating clockwise.
• To avoid damage of the sealing gasket (5)
when installing the knife block (6), do not ap-
ply excessive effort.
STORAGE
• Perform the requirements of the “CLEANING
AND CARE” section before taking the unit
away for storage.
• Keep the unit in a dry clean place out of reach
of children and disabled persons.
DELIVERY SET
Blender – 1 pc.
Instruction manual – 1 pc.
Warranty Certificate – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60 Hz
Rated input power: 400 W
Max. Power: 900 W
Glass bowl 1,5 L capacity
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail info@ vitek.ru for
receipt of an updated manual.
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not discard
the unit and the batteries with usual household
waste after the service life expiration; apply to
specialized centers for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage
Directive 2014/35/EU.