manualshive.com logo in svg

VitalConnect VistaPoint 3.1, Quickstart And Instructions For Use, Page: 24 / 26

Share
Download
VitalConnect VistaPoint 3.1 Quickstart And Instructions For Use Download Page 24

24

The A&D UC-352 is an optional weight scale that can 

upload weight readings automatically using Bluetooth. 

Use as directed by your care team.
Refer to the A&D Model UC-352 Instruction Manual for 

basic instructions on setting up the scale, including 

installing batteries and selecting weight units.

1.  Put Scale in Pairing Mode

Flip the scale over and hold down the SET button until 

“Pr” is displayed on the front. The SET button can be 

found between the label and the battery compartment. 

The scale is now in pairing mode. 

2.  Pair New in VistaPoint

a.  Put scale in pairing mode (previous step).
b.  Tap Take Weight in the Weight tile (or Take a 

Measurement on VistaPhone and then Take Weight).

c.  Tap Use Bluetooth.
d.  Tap Pair New.
e.  Tap Model UC-352 as the model.
f.  “Scanning for Devices” will display. Tap the Bluetooth 

ID of the scale when it appears.

Note: If you see a message asking you to confirm the 

device pairing, tap Confirm.

3.  Take a Reading

a.  Tap Take Weight in the Weight tile. 
b.  Tap Use Bluetooth (if not already selected). 
c.  Tap Take Reading (or Take a Measurement on 

VistaPhone and then Take Weight).

d.  Step on the scale. Step off the scale when it beeps 

and displays “Step Off”.

VistaPoint displays “Please wait connecting...” while it 

retrieves the current reading. When the reading is 

complete, the weight will be displayed on the dashboard, 

with an indicator of when the reading was taken. If the 

weight is not displayed, repeat the pairing process 

(

Steps 1 and 2 above

).

Pounds

Standby Mode

190.4

Take Weight

Weight

A&D UC-352 - 98:08:57:AC:66:DA

Last Reading:

2 Minutes Ago

Take Weight

Pair New

Use Bluetooth

Manual Entry

Currently using Bluetooth Upload.
No device is currently paired. Select 

Pair New

 to begin the pairing process.

Model UC-352-BLE

Section 25:

 Using a Bluetooth Device to Upload Weight

Press

SET Button

Bluetooth ID

Battery

Compartment

Label

FLIP

Select UC-352-BLE

Select Bluetooth ID

Begin Pairing

       Scanning for Devices

Devices Found:

00:0B:57:AC:0B:13

NOTE: If the device has already been paired, go directly 

to 

Step 3 “Take A Reading”

 below.

Tap Use Bluetooth

Tap Pair New

Take Weight

Take Weight

Reading

Complete

Take a Reading

Take

Reading

Step on 

Scale

Tap Take SPO2 or 

Take a Measurement

Tap Take SPO2 or 

Take a Measurement

Summary of Contents for VistaPoint 3.1



























Reviews:

No comments