21
%SPO2
Streaming Mode
98
Disconnect
Oxygen Saturation
Nonin 3150 00:0B:57:AC:66:DA
Nonin Model 3150 (Wrist)
3. Pair New in VistaPoint
See figure to the right.
a. Put device in pairing mode (previous step).
b. Tap Take SpO2 in the Oxygen Saturation tile
(or Take a Measurement on VistaPhone and then
Take SpO2).
c. Tap Use Bluetooth.
d. Tap Pair New.
e. Tap Model 3150 as the model.
f. “Scanning for Devices” will display. Tap the Bluetooth
ID of the Nonin 3150 when it appears. It should
match the ID in
Step 1 above
.
g. VistaPoint displays “Please wait connecting...”
If you see a message asking you to confirm the
device pairing, tap Confirm.
Pairing is now complete.
4. Start Continuous Measurement
(After Pairing)
See figure to the right.
a. Apply the Model 3150 wrist unit to the wrist. Attach
the fingertip sensor to the finger.
b. Tap Take SpO2 in the Oxygen Saturation tile
(or Take a Measurement on VistaPhone and then
Take SpO2).
c. Tap Use Bluetooth.
d. Tap Pair New.
e. Tap Model 3150 as the model.
f. “Scanning for Devices” will display. Tap the Bluetooth
ID of the Nonin 3150 when it appears. It should
match the ID in
Step 2 on previous page
.
g. VistaPoint displays “Please wait connecting...” and
then displays the current oxygen saturation value on
the dashboard. Updated readings will continue to be
transmitted to the dashboard as long as the Nonin
3150 is operational and the sensor is applied to the
finger.
–
If the dashboard displays “Finger Removed”,
check finger is inserted correctly, or tap
Disconnect to stop monitoring.
–
If the dashboard displays “Low Quality Reading”,
check finger is inserted correctly.
h. If the monitoring session is complete, tap Disconnect
in the Oxygen Saturation tile. This will remove the
pairing between VistaPoint and the Nonin 3150.
• If pairing, place in pairing mode
• If measuring, apply to wrist and fingertip
Take Oxygen Saturation
Pair New
Use Bluetooth
Manual Entry
Currently using Bluetooth Upload.
No device is currently paired. Select
Pair New
to begin the pairing process.
Tap
Pair New
Tap Nonin 3150
(Wrist)
Tap Bluetooth ID
Scanning for Devices
Devices Found:
00:0B:57:AC:0B:13
Tap
Use Bluetooth
Pair Device or Take a Reading
Reading displays
on dashboard
Tap Disconnect when
reading is no longer
required
Take SPO2
Note: Monitor battery life and replace batteries as
necessary. Refer to the Nonin Medical Model 3150
Operator’s Manual for more information and for help with
troubleshooting and error messages.
If “Low Quality Reading” is
displayed, check finger is
inserted correctly.
If “Finger is Removed” is
displayed, check finger is
inserted correctly or tap
Disconnect to stop measuring
oxygen saturation.
%SPO2
Low Quality Reading
97
Finger is Removed
--
Tap Take SPO2 or
Take a Measurement