VisuNet XT-9700, User Manual

Page: 34 / 81

Vi
suNet
XT
9
700
Seri
es
32
VisuNet XT 9700 Series
Connectors and Cabling
5.2.6 X5 - Serial Port (RS485)
An RS485 port is available via a 4-pin removable terminal block. The RS485 communication
line is an isolated line providing 1.5 KV of isolation.
Wire size: 16-28 AWG.
Tightening torque: Recommended tightening torque is 0.24 Nm (2 in-lbs).
X5 Terminal - RS485
5.2.7 X6 - Audio In/Out (I/O)
Audio connection is done via removable terminal blocks. Terminal block pin-out is as follows.
Wire size: 14-30 AWG.
Tightening torque: Recommended tightening torque is 0.24 Nm (2 in-lbs).
X6 Terminal - Audio In/Out
5.2.8 X7 - VGA
Video output is provided by a standard 15-pin D-sub VGA connector ( Figure 5.5 ).
Figure 5.5 X7 - VGA
5.2.9 X8 - LAN
There are three different LAN communication configurations. Each LAN connection is 1.0 GB
Fast Ethernet. See Figure 5.6 .
■
2 x RJ45
■
1 x RJ45 and 1 x ST Fiber (multi-mode)
■
1 x LAN and 1 x WiFi.
X5.1 Tx
X5.2 Rx
X5.3 Ground
X5.4 Not Used
X6.1 + (In)
X6.2 - (Out)
X6.3 + (In)
X6.4 - (Out)
Pin Assignment Pin Assignment
X7.1 Red X7.9 Key/Pwr
X7.2 Green X7.10 GND
X7.3 Blue X7.11 N/A
X7.4 N/A X7.12 ID1/SDA
X7.5 GND X7.13 HSync
X7.6 Red_RTN X7.14 VSync
X7.7 Green_RTN X7.15 ID3/SCL
X7.8 Blue_RTN