Visual Circuits Harmony 4E, User Manual

Page: 16 / 50

Installation Guide
6
Driver Installation (Windows 2000/NT 4.0)
For use under Windows 2000, complete both Parts 1 and 2 of the
driver software installation instructions.
For use under Windows NT 4.0, complete only Part 2 of the driver
software installation instructions.
Installation Instructions - Part 1: For Use Under
Windows 2000
(NT 4.0 users skip ahead to Part 2)
NOTE
Apply strain relief as required when attaching patch
cables. The set-screws will easily support the Universal
Cable strain, but will not take into account the weight and
strain of any connected cables.
IMPORTANT
If you have previously installed a different type of Visual
Circuits decoder card, or a different version for the
Harmony decoder series, it is recommended that you
uninstall that driver before proceeding.
WARNING
For installation for use under Windows 2000, Windows
2000 Service Pack 2 or higher is required.