Troubleshooting Tips
29
Mouse lags and overall poor system
performance
❏
Verify ATA 133 to ATA 33 compatible components and
drivers. A different IDE bus driver may be required for
proper system performance.
MPEG will not play on mapped network drive
❏
This will not work unless you set network=1. (See
Network
on page 16 for details).
Harmony Vidserve does not work at all
❏
Only one program can access the driver at a time. Close all
programs using the Harmony driver and run Harmony
Vidserve again.
All channels pause when a new file is started
on a channel
❏
Be sure buffers are fully loaded prior to playing. As the
number of channels being used increases, this delay may
need to be increased depending on individual server system
resources. Test with maximum channels playing to
determine the system’s threshold and maximum delay
required.
No audio
❏
Make sure mute button is not checked.
❏
Check cables and test with other audio source.
❏
When a Dolby Digital encoded file is playing, the analog
audio output will be muted.
Summary of Contents for Harmony 4E
