Visual Circuits Harmony 4E, User Manual

Page: 22 / 50

Installation Guide
12
❏
If the “Welcome to Found New Hardware Wizard” screen is
displayed again, you will need to go back to step 6 to
continue the procedure for installing additional channels/
cards as necessary.
❏
If the “Welcome to Found New Hardware Wizard” screen is
NOT displayed again, then this portion of the driver
installation is complete.
Continue on to Part 2 of the
Installation Instructions.
Installation Instructions - Part 2: For Use Under
Windows 2000/NT 4.0
1. Run the file SETUP.EXE from your installation disc.
2. In the setup program setup.exe, you are given the option to
chose between two types of installation:
❏
Full Driver Install:
Choose this option to install the driver and all software. You
will be asked a series of questions to configure the driver.
Your current parameter settings will be overwritten.
❏
Update Only:
(This option will only be offered if a previous driver has
been installed).
Choose this option to copy the new drivers and software
onto your system, but to leave your current driver settings
unchanged. This option requires that you already have a
version of the driver installed on your system.
3. Choose the directory where you wish to install the application
software.
4. Choose the shortcut folder name you wish to use.
5. Select Finish and reboot your system.
Start Menu Icons
Once you have rebooted the system, you will find the following
icons in the Visual Circuits group in the Start menu: