Visual Circuits Harmony 4E, User Manual

Page: 29 / 50

Editing Driver Settings
19
Audio/Video
DisableSync
0 = Enables audio/video synchronization.
1 = Disables audio/video synchronization.
Default = 0
Range = 0-1
VideoTypes
0 = All channels output S-Video/Composite.
1 = All channels output Component.
2 = All channels output RGB (sync on green).
Default = 0
Range = 0-2
Special
InitOnOpen
0 = Files are loaded smoothly without a disturbance to the video
output.
1 = The decoder chip is reinitialized whenever a new file is loaded.
Output is black after load until it plays.
Default = 0
Range = 0-1
NOTE
Harmony will work fine with InitOnOpen=0 in almost all
cases. If you wish to have a black screen, it is better to
use an application call (mpgBlack) than this parameter.
InitOnOpen=1 is useful as a diagnostic tool, but will cause
anomalies at some transitions.