Visual Circuits Harmony 4E, User Manual

Page: 35 / 50

25
T
ROUBLESHOOTING
T
IPS
BIOS Settings
Ensure BIOS settings for Windows servers have the “Non PnP
OS” selected.
Blue screen
❏
If a Blue Screen occurs during Windows startup and
Windows cannot be started, remove all devices from the
system and reboot.
❏
Try a process of elimination to run the system in a single
minimal system configuration, such as by inserting each
device into the system and rebooting. Usually starting with
the VGA/AGP card if not on board.
❏
Try placing the Harmony 4E card in a different PCI slot.
Message says '' Harmony Driver not found!''
when Harmony Vidserve is started
❏
"Harmony: board was not found"
Make sure the board or boards are securely seated in the
PCI bus.
NOTE
The error messages listed below are found in your
system’s Event Viewer.
For Windows NT: Locate Administrative Tools , then open
Event Viewer .
For Windows 2000: Right click on My Computer , then
open Manage , then Event Viewer and finally System .