background image

39

17. Damage to plated surfaces caused by fingerprints, scratches, melted items, or other external scores and 

residues left on the plated surfaces from the use of abrasive cleaners or polishes is not covered in this 

warranty. 

18. The Limited Warranty does not cover tarnish, discoloration or wear on the plated surfaces.

19. The paint on the Metal Brick Liner may peel. This is due to the extreme conditions applied to the paint 

during normal usage. It is not a flaw and is not covered under warranty.

20. Sherwood Industries Ltd. is free of liability for any damages caused by the fireplace or stove, as well as 

inconvenience expenses and materials. The Limited Warranty does not cover incidental or consequential 

damages.

21. The Limited Warranty does not cover any loss or damage incurred by the use or removal of any component 

or  apparatus  to  or  from  the  VistaFlame  fireplace  or  stove  without  the  express  written  permission  of 

Sherwood Industries Ltd. and bearing a Sherwood Industries Ltd. label of approval.

22. Any statement or representation of VistaFlame products and their performance contained in VistaFlame 

advertising, packaging literature, or printed material is not part of the Limited Warranty.

23. The Limited Warranty is automatically voided if the fireplace or stove’s serial number has been removed 

or  altered  in  any  way.  If  the  stove  is  used  for  commercial  purposes,  it  is  excluded  from  the  Limited 

Warranty.

24. No dealer, distributor, or similar person has the authority to represent or warrant VistaFlame products 

beyond the terms contained within the Limited Warranty. Sherwood Industries Ltd. assumes no liability 

for such warranties or representations.

25. Sherwood Industries Ltd. will not cover the cost of the removal or re-installation of the stove, hearth, 

facing, mantels, venting or other components.

26. Labour to replace or repair items under this Limited Warranty will be covered per our warranty service fee 

reimbursement schedule. Labour rates are set per component and as such total labour costs may not be 

covered.

27. Sherwood Industries Ltd. is not liable for freight or labour on any stove replaced in-field and is not liable 

for travel costs for service work. In the event of in-home repair work, the customer will pay any in-home 

travel fees or service charges required by the Authorized Dealer.

28.  At  no  time  will  Sherwood  Industries  Ltd.  be  liable  for  any  consequential  damages  which  exceed  the 

purchase price of the unit. Sherwood Industries Ltd. has no obligation to enhance or modify any stove 

once manufactured (example: as a stove evolves, field modifications or upgrades will not be performed). 

29. This Limited Warranty is applicable only to the original purchaser and it is non-transferable.

30.  This  warranty  only  covers  VistaFlame  products  that  are  purchased  through  an  authorized  VistaFlame 

dealer.

31. If for any reason any section of the Limited Warranty is declared invalid, the balance of the warranty 

remains in effect and all other clauses shall remain in effect.

32. The Limited Warranty is the only warranty supplied by Sherwood Industries Ltd., the manufacturer of the 

stove. All other warranties, whether express or implied, are hereby expressly disclaimed and purchaser’s 

recourse is expressly limited to the Limited Warranty.

33.  Sherwood  Industries  Ltd.  and  its  employees  or  representatives  will  not  assume  any  damages,  either 

directly or indirectly, caused by improper usage, operation, installation, servicing or maintenance of this 

stove.

34. Sherwood Industries Ltd. reserves the right to make changes without notice. Please complete and mail the 

warranty registration card and have the installer fill in the installation data sheet in the back of the manual 

for warranty and future reference.

35.  Sherwood  Industries  Ltd.  is  responsible  for  stocking  parts  for  a  maximum  of  seven  (7)  years  after 

discontinuing the manufacture or incorporation of the item into its products. An exception to this would 

be if an OEM supplier is not able to supply a part.

Warranty

Summary of Contents for VF 100A









































Reviews: