25
• VIEW ANGLE SETUP
VIEW ANGLE SETUP
PANNING RANGE
FLIP : AUTO
TILT ANGLE LIMIT : 00
SAVE AND EXIT(ESC TO CANCEL)
FLIP
OFF, AUTO
OFF:
The dome camera moves until 90
vertically.
AUTO:
When the camera reaches the floor directly above the moving object, it will stop.
At that time, release the controller instantly and pull it down again to run the auto-flip
function. When you use the panning range, it is recommended to use the flip mode to AUTO.
TILT ANGLE LIMIT
-5
~ 10
This option is designed to limit the view angle as there is some obstruction in zooming out on
specific areas of the tilt angle.
PANNING RANGE
When the dome camera is installed near a wall, panning range can be limited by user.
PANNING RANGE SETUP
(CTRL KEY)
RIGHT LIMIT : 000.0
LEFT LIMIT : 000.0
ENABLE : OFF
SWAP : OFF
AUTO PAN : ON
SAVE AND EXIT(ESC TO CANCEL)
1. Place the dome camera under 90 degree vertically.
2. Set “
RIGHT LIMIT
” by pressing the
Right
key.
3. Set “
LEFT LIMIT
” by pressing the
Left
key.
4. Set “
ENABLE
” to ON to use.
To exchange the right and the left limit, set “
SWAP
” to ON.
To apply limits on the auto pan (endless panning), set “
AUTO PAN
” to ON.
Summary of Contents for VP-HDA20IR-SMW
Page 2: ...2...
