Vista VP-HDA20IR-SMW, Installation Manual

Page: 17 / 39

12
3.5 Preset
If you need to view specific places routinely, you should program Presets. A Preset is a
programmed video scene with automatic pan, tilt, zoom, focus, and AE settings. In addition,
Presets may be assigned the “home” position for the dome camera. As many as 240 Presets,
whose positions are saved in the dome camera’s firmware, may be programmed.
There are eight pages of Preset menu. Each page has 30 Presets. Pages can be scrolled by
pressing the
Right or Left key on the first or last No. of Preset.
PRESET SETUP
NUMBER : 001
TITLE : ------
CAMERA SET
DWELL : -- SEC
1 2 3 4 5 6 7 8 9 0
- $ - - - - - - - -
- - - - - - - - - -
- - - - - - - - - -
NEXT PAGE
SAVE AND EXIT(ESC TO CANCEL)
-
Blank Preset position
$ Position has the Preset
! Current cursor position
Follow steps below to store the Preset positions:
1. Press the
MENU key to display the main menu on the monitor. Scroll to Preset and press the
Right key.
2. Select the blank Preset position to be stored by pressing the Up , Down , Right or Left key.
3. After selecting a blank position, press the IRIS Open key. Use the Up , Down , Right , Left , Tele
or Wide key to control the direction of the camera and lens.
4. After aiming the camera (view direction and lens control), press the IRIS Close key. The cursor
will be on the “
TITLE
” after saving data then press the
Tele or Wide key to edit the Preset title.
Follow the procedure of the Auto Scan above to edit titles.
5. Select “
CAMERA SET
” and press the
Right or Left key. Then the Preset camera setup displays.
PRESET CAMERA SETUP
FOCUS : AUTO
MOTION : OFF
MOTION SETUP
AE SETUP
SAVE AND EXIT(ESC TO CANCEL)
Set
FOCUS AUTO, MANUAL, ONE PUSH
Set MOTION OFF, ON
Select “
MOTION SETUP
” and press the
Right or Left key. Then the MOTION setup displays.
MOTION SETUP
SENSITIVITY : 10
POSITION : ALL
DELAY : 00 SEC