14
3.6 Tour
There are 8 programmable Tours. Each Tour consists of up to 40 Preset positions, Patterns, Scans
or other Tours (second-level). Using second-level Tours, it can be expanded to over 300 functions
in a single Tour.
TOUR SETUP
NUMBER : 01
TITLE : T01
SCAN TYPE : NORMAL
SPEED : -- STEP
TOUR FUNCTION
SAVE AND EXIT(ESC TO CANCEL)
TOUR FUNCTION SETUP
(CTRL KEY)
DWELL : -- SEC
003 A04 --- --- ---
--- --- --- --- ---
--- --- P01 --- ---
--- T02 --- --- ---
--- --- --- --- ---
--- --- --- --- ---
--- --- --- --- ---
--- --- --- --- ---
EXIT(ESC TO EXIT)
---
Blank position
SCAN TYPE
NORMAL, VECTOR
DWELL
03 ~ 99 seconds
003
Preset (1 ~ 240)
A04
Auto Scan (1 ~ 8, 10 ~ 17)
P01
Pattern (1 ~ 8)
T02
Tour (1 ~ 8)
Follow the steps below to program the Tours:
1. Press the
MENU
key to display the main menu on the monitor. Scroll to Tour and press the
Right
key to enter the Tour menu.
2. Select “
NUMBER
” and set the desired number by pressing the
Right
or
Left
key.
3. Select “
TOUR FUNCTION
” and press the
Right
key to enter the Tour Function Setup menu.
4. Choose a blank position to be programmed by pressing the
Up
,
Down
,
Right
or
Left
key.
5. To add a stored Preset, press the
Tele
or
Wide
key then the stored Preset number displays.
6. To place functions other than Preset, press the
IRIS Open
key to scroll for Tour, Pattern or Auto
Scan respectively.
7. You can also overwrite the programmed number and remove a stored number from the Tour,
press the
IRIS Open
key until ‘---’ is displaying in the position.
8. Repeat step 2 through 6 for each desired position. Each title will be displayed on top of the line.
9. To edit the “
TITLE
”, follow the procedure of the Auto Scan above to edit titles.
10. Select “
SAVE AND EXIT
” and press the
Right
or
IRIS Open
key. Press
the
IRIS Close
key to
exit the program without saving.
You can expand the Tour sequence by calling other programmed Tours.
NOTE: The speed applies in the vector mode only.
NOTE: In the Tour mode, in conjunction with Preset and Auto Scan, you can make the
camera travel from a Preset position to another Preset position at a specific speed.
Example:
Preset 001>002>003>004>005>006, Auto Scan 01 starts at Preset 002, ends at
Preset 003, Auto Scan 02 starts at Preset 005, ends at Preset 006;
Tour 001, 002, A01, 004, A02.
1
➔
2 2~3
➔
4
➔
5~6, repeat
Summary of Contents for VP-HDA20IR-SMW
Page 2: ...2...
