24
3.12 Dome Setup
CONFIGURATION MENU
HOME FUNCTION SETUP
VIEW ANGLE SETUP
FACTORY DEFAULT
DOME RESET
OSD DISPLAY
SYSTEM SETUP
FUNCTION RUN
SYSTEM INFORMATION
EXIT(ESC TO EXIT)
• HOME FUNCTION SETUP
HOME FUNCTION SETUP
FUNCTION : NONE
NUMBER : ---
WAITING TIME : 120 SEC
ENABLE : OFF
SAVE AND EXIT(ESC TO CANCEL)
FUNCTION
NONE, TOUR, PATTERN, AUTO SCAN, PRESET
NUMBER
---
WAITING TIME
10 ~ 240 seconds
ENABLE
ON, OFF
The Home Function can be set so that the camera automatically goes to Tour, Pattern, Auto
Scan or Preset after the keyboard or DVR has been idle for a specified amount of time.
For example, if the controller is idle for 120 seconds, the camera goes to Preset 1.
Follow these steps to program the Home position:
1. Select “
FUNCTION
” by pressing the
Right
or
Left
key to scroll through the None, Tour,
Pattern, Auto Scan or Preset functions.
2. Select “
NUMBER
” and press the
Right
or
Left
key. The recorded function number will scroll.
3. Select “
WAITING TIME
” and press the
Right
or
Left
key to select from 10 to 240 seconds.
4. Select “
ENABLE
” and turn to ON or OFF by pressing the
Right
or
Left
key.
Summary of Contents for VP-HDA20IR-SMW
Page 2: ...2...
