Vista VK2-600PTZ, Configuration And User Manual

Page: 8 / 85

1
VK2-600PTZ User manual
Chapter 1
— Introduction
1.1 Features
Dual video streams simultaneously at full frame rate in all resolutions up to D1 (720X480 in
NTSC, 720X576 in PAL) using Motion JPEG and H.264 (or MPEG-4).
Built-in 22:1 optical zoom with True Day/Night operation.
Intelligent capabilities such as enhanced video motion detection. The
encoder‘s external inputs
and outputs can be connected to devices such as sensors and relays, enabling the system to
react to alarms and activate lights or open/close doors.
Supports two-way audio.
Logs all user access, and lists currently connected users. Also, full frame rate video can be
provided over HTTPS.
Interface Protocol: TCP/IP, UDP, IPv4/v6, HTTP, HTTPS, QoS, FTP, SNMP, uPnP, RTP,
RTSP, RTCP, DHCP, ARP.
120 Preset positions with the individual Camera AE setup.
4 Tours consist of Presets, Patterns, Auto Scans and other Tours can be programmed with
over 150 functions and Preset locations. While moving, each Preset scan can be watched in
smooth
Vector Scan mode.
4 Auto Scans with the normal, the vector, and the random mode and the Endless Auto-Pan
with 13 speed steps.
4 Patterns (up to 200 second) and 4 Privacy Zones.
8 Area Titles.
1 Alarm input / 1 Alarm output (TTL ON/OFF)
Variable speed from 0.1 /sec to 380 /sec.
Three Variable speed (SLOW, NORMAL, TURBO).
Turbo speed is 380 /sec with Ctrl key pressed.
Pan / Tilt speed is inversely proportional to the zoom ratio with the option.
Maximum speed is 380 /sec when Preset command.
Auto Calibration from 0.1 to 6 (Tilt range is 0 to 180 ).
Programmable user preferences (alarm, preset, title, etc.).
180 Digital Flip.
Up to 255 selectable camera addresses.
Multi-language Menu Display, Password Confirmation.
Function Run menu using DVR without function key (Pattern, Scan,..)
Built-in RS-485 receiver driver.
12VDC or PoE operation.
Use a Certified/Listed Class 2 power supply only.