Vista VK2-600PTZ, Configuration And User Manual

Page: 61 / 85

54
VK2-600PTZ User manual
NOTE:
The ‗AUTO‘ setting in D/N mode function does not operate when ‗MANUAL‘ mode is
selected in AE Control.
6. Set
‗DWELL TIME‘ (03~99 seconds in steps of 1) - adjust with
(TELE/WIDE)
7. To select the next page of Presets, scroll the page by moving the Joystick to the left or right
on the first and last columns of the menu.
8. Repeat step 2 through 7 for each additional Preset position.
9.
To save changes highlight ‗SAVE AND EXIT‘ and move
Joystick right. Joystick left exits
without saving.
4.5 Quick setting a Preset
This can be achieved after selecting the desired scene e.g. with VKBD4 by pressing FUNCTION
(Fn) then the No. ( 1 to 120 ) then PRESET key sequentially. The current view will be stored to
the selected Preset number.
If the Preset number is not empty,
an ‗
OVER WRITE
‘ message will be displayed on the screen
and select
to ‗OK‘ or ‗Cancel‘ as required and move the
Joystick to the right to confirm.
Example : FN, 1, 0, 1, PRESET keys will store current view as Preset no. 101 . In this case, focus
will be programmed as Auto, dwell time will be set to 3 second, and the current AE
mode will be programmed.
NOTE: If the password is set to ON within the Dome then this will need to be entered to accept
the new or amended Preset change.
4.6 Tour
There are 4 programmable Tours. Each Tour consists of up to 42 Preset positions, Patterns,
Scan or other Tours (second-level). Using second-level Tours, a Tour can be expanded to over
150 functions in a single Tour. Tours can be recalled
No. + TOUR .
TOUR SETUP
NUMBER : 01
TITLE : T01
SCAN TYPE : NORMAL
SPEED : 5 STEP
DWELL : -- SEC
003 A01 --- --- --- --- ---
--- --- --- --- --- --- ---
--- --- P01 --- --- --- ---
--- T02 --- --- --- --- ---
--- --- --- --- --- --- ---
--- --- --- --- --- --- ---
SAVE AND EXIT(ESC TO CANCEL)
---
: Blank position
SCAN TYPE : NORMAL, VECTOR
DWELL : 03~99 SEC
003 : Preset (1~120)