Vista VK2-600PTZ, Configuration And User Manual

Page: 58 / 85

51
VK2-600PTZ User manual
Use the Joystick to move and navigate the cursor to the alpha numeric character
table displayed and select the required character with the (IO/FN) keys.
TITLE EDIT MENU
A01
*
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( )
ALL DELETE
EXIT(ESC TO EXIT)
2.
Select ‗MODE‘ - adjust with
(TELE/WIDE)
3. Select ‗SPEED‘ - adjust with
(TELE/WIDE)
4.
‗START ANGLE‘
Use the Joystick to move cursor to START ANGLE Press the (IO/FN) key
‗CTRL‘ is displayed.
Move the camera to the desired location and the zoom position. Press the (IC/FF) and
‗CTRL‘
disappears. and START ANGLE is now set. To fine tune the Pan and Tilt position use
Joystick to move the cursor to the field you wish to change and twist the Joystick to adjust
the position in increments of 0.1 degree.
5.
‗END ANGLE‘
Use the Joystick to move cursor to END ANGLE. Press the (IO/FN) key
‗CTRL‘ is displayed.
Move the camera to the desired location and the zoom position. Press the (IC/FF) and
‗CTRL‘
disappears and END ANGLE is now set. To fine tune the Pan and Tilt position use the
Joystick to move the cursor to the field you wish to change and twist the Joystick to adjust
the position in increments of 0.1 degree.
6.
Select ‗SCAN DIR‘ to CCW or CW – adjust with
(TELE/WIDE)
7. Select
‗SWAP‘. Set to ON, to swap the start angle and the end angle - adjust with
(TELE/WIDE)
8. Se
lect ‗DWELL TIME‘ - adjust with
(TELE/WIDE)
9.
To save changes highlight ‗SAVE AND EXIT‘ and move
Joystick right. Joystick left exits
without saving.
4.4 Preset
Up to 120 presets may be programmed. Presets can be recalled No. + PRESET . Presets on the
VPL6 are very powerful and allow you to set the camera parameters and even a motion alarm for
each preset. There are two pages of Preset menu. Each page has 60 Presets. The pages can be
scrolled by moving the
Joystick to the left or right on the first or last No. of Preset on the line.