Vislink NewStream User And Technical Manual Download Page 62

Page: 62 / 120

Page 62

NewS

tream

User Guide and Technical Manual

Satelitte Status Page

[Continued]

Video Input

The Video Input

eld displays one of the following options:

• NTSC
• NTSC No Pedestal
• PAL
• PAL-M
• PAL-N
• BARS-525
• BARS-625
• 720p50
• 720p59.94
• 1080i50
• 1080i59.94
• SDI-525
• SDI-625
• HD

Bars

Video Bitrate

The Video Bitrate value ranges from 0-99.999 Mb/s.

Profi le

The Pro

eld Pro

le values differ depending on encoding type [H.264 or MPEG2].

The MPEG-2 SD example is:

• 4:2:0

MP@ML

• 4:2:2

P@ML

Delay

The Delay

eld displays one of these three values:

• Low
• Standard
• Ultra

Low

GOP

The values of successive groups of pictures ranges from 0 to 60.

Aspect Ratio

SD formats allow an Aspect ratio of either 4:3 or 16:9. HD formats aloow 16:9 only. The
Aspect Ratio

eld displays one of these two values:

• 4:3
• 16:9

Service Name

This

eld displays the 16 character service information name for the current preset.

Summary of Contents for NewStream

























































































































Search results

Summary of Contents for NewStream

Reviews:

Related manuals for NewStream

Brands by name

Popular brands

Vislink NewStream, User And Technical Manual

Search results

Summary of Contents for NewStream

Reviews:

Related manuals for NewStream

Brands by name

Popular brands