Page
43
NewS
tream
User Guide and Technical Manual
SNG Information - Channel Plan Mode - IDU Touchscreen Control
Press the
Frequency Tune
button to toggle to the
Channel Plan
touchscreen, as
shown in Figure 27. When the
NewS
tream
is in Satellite Channel Plan Mode, you select
a frequency by scrolling through a pre-con
fi
gured listing of channels. The frequency
selection does not link presets and channels.
You can scroll through the list of channels that are pre-con
fi
gured via the rocker switch
[Figure 5 item G] and press the
Enter
button [Figure 5 item I] to select the desired
frequency. The Enter button [Figure 5 item I] blinks amber as you scroll through the
list, and reverts back to the last known selected frequency if there is no action for 15
seconds. Channel selection persists from one power cycle to the next.
NOTE:
You must fi rst create an SNG Channel Plan via the SNG Frequency Plans
Page in Remote control to use the channel plan setting under Local control with
the IDU touchscreen. Refer to the Channel Plan example in the Satellite Frequency
Plans [SNG] Web interface section.
Figure 27:
NewS
tream SNG Information Touchscreen - Channel Plan Mode
When you operate SNG in Channel Plan Mode, the Block Downconverter Setup
touchscreen is disabled.
