Page
6
NewS
tream
User Guide and Technical Manual
Safety Instructions
• Always use the correct power source during operation to avoid damaging the
product.
•
Rough handling of the product may cause physical damage or malfunction.
•
It is not recommended to use
NewS
tream
in harsh weather conditions or very low or
high temperatures.
•
To ensure that the warranty remains valid, please do not disassemble the unit.
Internal Battery
The
NewS
tream
IDU contains one lithium coin battery for the maintenance of the time
and date function.
• This battery is rechargeable and should last the life of the
NewS
tream.
• The battery is nonreplaceable. Contact the factory should you experience an issue
with the time and date functionality.
WARNING
:
If you modify the product without authorization from Vislink, you will void the
warranty.
CAUTION
:
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries properly.
Unpacking the NewS
tream
Transmitter
Before you install your new equipment, carefully unpack your new equipment to avoid
accidental damage.
• Locate all parts and accessories and verify that they are listed on the packing list.
DO NOT discard the container or packing material until you have inspected the
equipment and are sure there is no shipping damage. The container and pack-
ing must be available in case you need to
fi
le a damage claim with the shipping
carrier.
• Inspect the equipment for damage and ensure that it is clean and dry.
• Inspect the cables, connectors, switches, and displays to ensure that they are not
broken, damaged or loose.
If you discover damage after unpacking the system, report the damage as follows:
• Immediately
fi
le a claim with the shipping carrier.
• Forward a copy of the damage report to Vislink Customer Service.
• Contact Vislink Customer Service to determine the disposition of the equipment.
Refer to the section on the last pages:
Support for Your Vislink Product
.
