Personal
Blender
CPB-E600G
CPB-E600P
CPB-E600B
User Manual
Page 1: ...Personal Blender CPB E600G CPB E600P CPB E600B User Manual ...
Page 2: ...top the blender release the switch 2 Fasten the blade assembly on the open end of the bottle 3 Place the blender base on a flat and sturdy surface and plug it into the power socket 6 After the ingredients are fully blended turn off the power before turning the bottle counterclockwise to take out the bottle from the base 7 Replace the blade assembly with the drinking lid for takeout 4 Turn the bott...
Page 3: ... 4 do not let the power cord hang over the edge of the table or counter or touch on hot surfaces 5 never leave the appliance unattended when in use 6 close supervision is necessary when used by or near children 7 The blade is sharp Handle with care 8 To avoid the risk of injury never place the blade assembly on the base without the bottle properly attached 9 do not attempt to bypass the interlock ...
Page 4: ...lled on the base according to the correct directions for the blender to start safely 5 don t overload the bottle If the motor stalls turn the blender off immediately unplug the unit and let it cool for at least 10 minutes CLEANING AND MAINTENANCE 1 Before cleaning unplug the appliance and detach the accessories 2 use a damp cloth to clean the exterior of the blender base do not immerse it in water...
