Vislink NewStream User And Technical Manual Download Page 59

Page: 59 / 120

Page

NewS

tream

User Guide and Technical Manual

Cellular Status Page

[Continued]

Max Bitrate

This

eld displays a range of:

• 256 kilobits per second [kbps]
• 500

kbps

• 768

kbps

• 1.0 Megabit per second [Mbps]
• 1.5

Mbps

• 2.0

Mbps

• 2.5

Mbps

• 3.0

Mbps

• 3.5

Mbps

• 4.0

Mbps

• 5.0

Mbps

• 6.0

Mbps

• 7.0

Mbps

• 8.0

Mbps

• 9.0

Mbps

• 10.0

Mbps

Audio Encoding 1

The Audio Input Encoding types that are displayed in this

eld include:

• Off
• MPEG Layer II

— MPEG Audio Layer II is a core audio algorithm.

• AAC

— Advanced Audio Coding

Audio Input

The Audio Input Encoding values that are displayed in this

eld include:

• Analog

• SDI

Embedded

— Serial digital interface [SDI] is a family of video interfaces that

have been standardized by SMPTE. For example, ITU-R BT.656 and SMPTE
259M de

ne digital video interfaces used for broadcast-grade video. This mode

embeds the audio into the SDI stream.

• AES-EBU

—

The digital audio standard frequently called AES/EBU [aka AES3], is

used for carrying digital audio signals between various devices.

Service Name

This

eld displays the name of the cellular service provider.

Network Name

The Network Name or SSID, differentiates one WLAN from another, so all Access
Points and all devices attempting to connect to a speci

c WLAN must use the same

SSID to enable effective roaming. As part of this association process, a wireless client
must have the same SSID as that entered in the Access Point or it will not be permitted
to join the BSS.

Summary of Contents for NewStream

























































































































Search results

Summary of Contents for NewStream

Reviews:

Related manuals for NewStream

Brands by name

Popular brands

Vislink NewStream, User And Technical Manual

Search results

Summary of Contents for NewStream

Reviews:

Related manuals for NewStream

Brands by name

Popular brands