Vislink NewStream User And Technical Manual Download Page 84

Page: 84 / 120

Page 84

NewS

tream

User Guide and Technical Manual

Modify Presets Cellular Settings

[Continued]

Max Bitrate

This drop-down

eld presents a range of:

• 256 kilobits per second [kbps]
• 500

kbps

• 768

kbps

• 1.0 Megabit per second [Mbps]
• 1.5

Mbps

• 2.0

Mbps

• 2.5

Mbps

• 3.0

Mbps

• 3.5

Mbps

• 4.0

Mbps

• 5.0

Mbps

• 6.0

Mbps

• 7.0

Mbps

• 8.0

Mbps

• 9.0

Mbps

• 10.0

Mbps

Transport Stream

The following entry

elds are used by the system to differentiate

NewS

tream

Cellular

Transport Streams.

Service Name

This

eld provides a means to differentiate the

NewS

tream

Transport Stream with a

unique Service Name.

Network Name

This

eld provides a means to differentiate the

NewS

tream

Transport Stream with a

Network Name.

Program ID

This

eld provides a means to differentiate the

NewS

tream

Transport Stream with a

Program Identi

cation [valid range: from 1 to 99999].

Network ID

This

eld provides a means to differentiate the

NewS

tream

Transport Stream with a

unique Network Identi

cation [valid range: from 1 to 99999].

Transport ID

This

eld provides a means to differentiate the

NewS

tream

Transport Stream with a

unique identi

cation [valid range: from 1 to 99999].

Video PID

This

eld displays the Video Packet Identi

cation for the

NewS

tream

Transport Stream

[valid range: from 32 to 8190].

Summary of Contents for NewStream

























































































































Search results

Summary of Contents for NewStream

Reviews:

Related manuals for NewStream

Brands by name

Popular brands

Vislink NewStream, User And Technical Manual

Search results

Summary of Contents for NewStream

Reviews:

Related manuals for NewStream

Brands by name

Popular brands