Vislink DXL5000 RX, User And Technical Manual

Page: 35 / 40

DXL5000 Specifications A-3 DXL5000 User and Technical Manual
A.1.6 CHAN1 and CHAN2 DATA Connections
The following table shows the CHAN1 (customer connection) and CHAN2 (inter-unit connection
that requires a cross-over cable) DATA RJ-45 connectors, which provides 10/100 Base T
Ethernet connections to the unit. The cable you use for CHAN1 depends on the device to which
you connect. For example, use a cross-over cable for a PC, and a straight-through cable for a
switch or a router.
Section 2.3, Installing the DXL5000 includes a diagram that shows the
connections.
A.1.7 CHAN1 and CHAN2 T1/E1 Connections
The following table shows the CHAN1 T1/E1 and CHAN2 T1/E1 RJ-45 connectors, which
provide Channel 1 and Channel 2 T1/E inputs to the unit.
Connector Pin Signal Pin Signal
1 (out) 5 N/C
2 ETH_TX – (out) 6 ETH_RX – (in)
3 (in) 7 N/C
4 N/C 8 N/C
Connector Pin Signal Pin Signal
1 T1/E1CH_OUT_N 5 T1/E1CH_IN_P
2 T1/E1CH_OUT_P 6 N/C
3 NC 7 N/C
4 T1/E1CH_IN_N 8 N/C
1 2 3 4 5 6 7 8
1 2 3 4 5 6 7 8