About the DXL5000 1-5
DXL5000 User and Technical Manual
See
for information about connector pin assignments.
13
IMC BUS
9
-
pin male D
connector
(Reserved for future use.)
14
WAYSIDE DATA
9
-
pin male D
connector
Provides RS-232 output for wayside data transmission via the
SCM modem.
15
DIV OUT
75 Ohm BNC female connector
Provides the diversity receive output from the unit.
16
ASI 3/SMPTE310
75 Ohm BNC female connector
Provides a third ASI service output or SMPTE310 service
output from the unit.
17
RESET
Switch
When
pressed and held for about 5 seconds, the 4-digit
dBm
display flashes and resets the IP address, subnet mask, and
default gateway addresses to the factory default addresses. It
does not affect other password or configuration settings.
18
RF IN
SMA 50 Ohm female connector
Provides RF input to the unit.
