About the DXL5000 1-3
DXL5000 User and Technical Manual
See
for information about connector pin assignments.
13
IMC BUS
9
-
pin male D
connector
(Reserved for future use.)
14
WAYSIDE DATA
9
-
pin male D
connector
Provides RS-232 input for wayside data transmission via the
SCM modem.
15
ASI 3/SMPTE310
75 Ohm BNC female connector
Provides a third ASI input or SMPTE310 service input to the
unit.
16
RESET
Switch
When
pressed and held for about 5 seconds, the 4-digit
TX
POWER
display flashes and resets the IP address, subnet
mask, and default gateway addresses to the factory default
addresses. It does not affect other password or configuration
settings.
17
RF OUT
SMA 50 Ohm female connector
Provides RF connection to branching from the RF circulator to
the external antenna.
