Visiotech DVR6204-FSDI User Manual Download Page 87

Page: 87 / 166

User Manual of Digital Video Recorder

Click the

Export

button to pop up the backup device management interface.

If the inserted USB device is not recognized:

•

Click the Refresh button.

•

Reconnect device.

•

Check for compatibility from vendor.

You can also format USB flash drive or USB HDDs via the device.

Figure 7. 19

Export by Event Using USB Flash Drive

Click the

Export

button and then select to export the video and log files or the player to the backup device.

Click

to confirm.

Figure 7. 20

Export Selection

Stay in the Exporting interface until all record files are exported with pop-up message “Export finished”.

Figure 7. 21

Export Finished

Check backup result.

Summary of Contents for DVR6204-FSDI







































































































































































Search results

Summary of Contents for DVR6204-FSDI

Reviews:

Related manuals for DVR6204-FSDI

Brands by name

Popular brands

Visiotech DVR6204-FSDI, User Manual

Search results

Summary of Contents for DVR6204-FSDI

Reviews:

Related manuals for DVR6204-FSDI

Brands by name

Popular brands