Visiotech DVR6204-FSDI User Manual Download Page 59

Page: 59 / 166

User Manual of Digital Video Recorder

5.8

Configuring HDD Group for Recording

Purpose:

You can group the HDDs and save the record files in certain HDD group.

Steps:

Enter HDD setting interface.

Menu>HDD>Advanced

Figure 5. 28

HDD General

Select

Advanced

on the left bar.

Check whether the storage mode of the HDD is Group. If not, set it to Group. For detailed information,

please refer to

Chapter 10.4 Managing HDD Group

Select

General

in the left bar.

Click

to enter editing interface.

Configuring HDD group.

Choose a group number for the HDD group.

Click

Apply

to save your settings.

Click

to back to the upper level menu.

Repeat the above steps to configure more HDD groups.

Choose the Channels which you want to save the record files in the HDD group.

Select

Advanced

on the left bar.

Figure 5. 29

HDD Advanced

Choose Group number in the dropdown list of

Record on HDD Group

Check the channels you want to save in this group.

Click

Apply

to save settings.

After configuring the HDD groups, you can configure the Recording settings following the

procedure provided in

Chapter 5.2-5.7

Summary of Contents for DVR6204-FSDI







































































































































































Search results

Summary of Contents for DVR6204-FSDI

Reviews:

Related manuals for DVR6204-FSDI

Brands by name

Popular brands

Visiotech DVR6204-FSDI, User Manual

Search results

Summary of Contents for DVR6204-FSDI

Reviews:

Related manuals for DVR6204-FSDI

Brands by name

Popular brands