Visiotech DVR6204-FSDI User Manual Download Page 101

Page: 101 / 166

User Manual of Digital Video Recorder

100

8.3

Detecting Video Loss

Purpose:

Detect video loss of a channel and take alarm response action(s).

Steps:

Enter Video Loss interface of Camera Management and select a channel you want to detect.

Menu> Camera> Video Loss

Figure 8. 11

Video Loss Setup Interface

Set up handling method of video loss.

Check the checkbox of “Enable Video Loss Alarm”.

Click

button to set up handling method of video loss.

Set arming schedule of the channel.

Select

Arming Schedule

tab to set the channel’s arming schedule.

Choose one day of a week and up to eight time periods can be set within each day. Or you can click the

Copy

button to copy the time period settings to other day(s).

Time periods shall not be repeated or overlapped.

Figure 8. 12

Set Arming Schedule of Video Loss

Repeat the above steps to set arming schedule of other days of a week. You can also use

Copy

button to

Summary of Contents for DVR6204-FSDI







































































































































































Search results

Summary of Contents for DVR6204-FSDI

Reviews:

Related manuals for DVR6204-FSDI

Brands by name

Popular brands

Visiotech DVR6204-FSDI, User Manual

Search results

Summary of Contents for DVR6204-FSDI

Reviews:

Related manuals for DVR6204-FSDI

Brands by name

Popular brands