Visiotech DVR6204-FSDI User Manual Download Page 20

Page: 20 / 166

User Manual of Digital Video Recorder

2.1

Starting Up and Shutting Down the DVR

Purpose:

Proper startup and shutdown procedures are crucial to expanding the life of the DVR.

Before you start:

Check that the voltage of the extra power supply is the same with the DVR’s requirement, and the ground

connection is working properly.

Starting up the DVR

Steps:

Check the power supply is plugged into an electrical outlet. It is HIGHLY recommended that an

Uninterruptible Power Supply (UPS) be used in conjunction with the device.

The Power indicator LED on the front panel should be red, indicating the device gets the power supply.

Turn on the power switch on the rear panel, and the Power indicator LED should turn yellow indicating

that the unit begins to start up.

After startup, the Power indicator LED remains yellow. A splash screen with the status of the HDD

appears on the monitor. The row of icons at the bottom of the screen will show the HDD status. If an ‘X’

is shown, it means that the HDD is not installed or cannot be detected.

Shutting down the DVR

Steps:

Enter the Shutdown menu.

Menu > Shutdown

Figure 2. 1

Shutdown Menu

Select the

Shutdown

button.

Click the

Yes

button.

Rebooting the DVR

While in the Shutdown menu (Figure 2. 1), you can also reboot the DVR.

Steps:

Enter the

Shutdown

menu by clicking Menu > Shutdown.

Click the

Logout

button to log out or the

Reboot

button to reboot the DVR.

Summary of Contents for DVR6204-FSDI







































































































































































Search results

Summary of Contents for DVR6204-FSDI

Reviews:

Brands by name

Popular brands

Visiotech DVR6204-FSDI, User Manual

Search results

Summary of Contents for DVR6204-FSDI

Reviews:

Brands by name

Popular brands