Visiotech DVR6204-FSDI User Manual Download Page 55

Page: 55 / 166

User Manual of Digital Video Recorder

5.6

Configuring Holiday Record

Purpose:

Follow the steps to configure the record schedule on holiday for that year. You may want to have different plan

for recording on holiday.

Steps:

Enter the Record setting interface.

Menu>Record

Choose

Holiday

on the left bar.

Figure 5. 21

Holiday Settings

Enable Edit Holiday schedule.

Click

to enter the Edit interface.

Figure 5. 22

Edit Holiday Settings

Check the checkbox of

Enable

Select Mode from the dropdown list.

There are three different modes for the date format to configure holiday schedule. By Month, By Week,

and By Month are selectable.

Set the start and end date.

Click

Apply

to save settings.

Click

to exit the Edit interface.

Summary of Contents for DVR6204-FSDI







































































































































































Search results

Summary of Contents for DVR6204-FSDI

Reviews:

Related manuals for DVR6204-FSDI

Brands by name

Popular brands

Visiotech DVR6204-FSDI, User Manual

Search results

Summary of Contents for DVR6204-FSDI

Reviews:

Related manuals for DVR6204-FSDI

Brands by name

Popular brands