Visiotech DVR6204-FSDI User Manual Download Page 122

Page: 122 / 166

User Manual of Digital Video Recorder

121

9.4

Configuring Network Detection

Purpose:

You can obtain network connecting status of DVR through the network detection function, including network

delay, packet loss, etc.

9.4.1

Testing Network Delay and Packet Loss

Steps:

Enter the Network Traffic interface.

Menu > Maintenance > Net Detect

Click the

Network Detection

tab to enter the Network Detection menu.

Figure 9. 20

Network Detection Interface

Select a NIC to test network delay and packet loss.

Enter the destination address in the text field of

Destination Address

Click the

Test

button to start testing network delay and packet loss. The testing result pops up on the

window. If the testing is failed, the error message box will pop up as well.

Figure 9. 21

Testing Result of Network Delay and Packet Loss

9.4.2

Exporting Network Packet

Purpose:

By connecting the DVR to network, the captured network data packet can be exported to USB-flash disk, SATA

and other local backup devices.

Steps:

Enter the Network Traffic interface.

Menu > Maintenance > Net Detect

Click the

Network Detection

tab to enter the Network Detection interface.

Select the backup device from the dropdown list of Device Name.

Summary of Contents for DVR6204-FSDI







































































































































































Search results

Summary of Contents for DVR6204-FSDI

Reviews:

Related manuals for DVR6204-FSDI

Brands by name

Popular brands

Visiotech DVR6204-FSDI, User Manual

Search results

Summary of Contents for DVR6204-FSDI

Reviews:

Related manuals for DVR6204-FSDI

Brands by name

Popular brands