Visionis VS-AXESS-1ETL, User Manual

Page: 69 / 123

Access Control Terminal
·
User Manual
61
Configuring Network Parameters
Click Network -> General . You can configure the NIC type, the IPv4 address, the subnet mask (IPv4),
the default gateway (IPv4), MTU address, MTU, and the device port. Click Save to save the settings.
Configuring Upload Method
Purpose
：
You can set the center group for uploading the log via the EHome protocol.
Steps:
1.
Click Network -> Report Strategy .
2.
Select a Center Group from the drop-down list.
3.
Check the Enable check box.
4.
Set the uploading method.
You can set the main channel and the backup channel.
5.
Click Settings on the right of the channel field to set the detailed information.
6.
Click Save to save the settings.
Configuring Advanced Network
Click Network -> Advanced Settings . You can configure the DNS address 1, the DNS address 2, the
alarm host IP and the alarm host port. Click Save to save the settings.