Access Control Terminal
·
User Manual
59
Setting System Maintenance
Steps:
1.
In the Remote Configuration interface, click
System
->
System Maintenance
.
2.
Click
Reboot
to reboot the device.
Or click
Restore Default Settings
to restore the device settings to the default ones, excluding the
IP address.
Or click
Restore All
to restore the device parameters to the default ones. The device should be
activated after restoring.
Note:
The configuration file contains the device parameters.
3.
You can also remote upgrade the device.
1)
In the Remote Upgrade part, select an upgrade file type in the dropdown list.
You can select Controller Upgrade File or Card Reader Upgrade in the drop-down list.
2)
Click
to select the upgrade file.
3)
Click
Upgrade
to start upgrading.
Note:
Only card readers connected via RS-485 can be upgraded.
Summary of Contents for VS-AXESS-1ETL
