C
HECKING
THE
H
ARDWARE
AND
S
ETTING
THE
L
AMP
P
OWER
S
AVING
71
3.
Click the
Properties
button.
Your scanner has a built-in power saving feature that is set to power down
after 15 minutes of idle time. You can change the time before the scanner
powers down, from 1 minute to a maximum of 3 hours.
4.
Click the arrows for the Lamp time-out setting and choose a time setting.
To turn the lamp on and off manually without turning off power to the
scanner, click the
Lamp On
or
Lamp Off
buttons.
To return the scanner to its factory settings, click
Reset Device
.
5.
Click
OK
to save the changes and close the dialog box.
Note:
The lamp cannot be turned off if the scanner top is up. Close the
scanner lid before turning off the lamp.
