Visioneer OneTouch 9750 User Manual Download Page 41

Page: 41 / 160

ISIONEER

9750 S

CANNER

SER

’

UIDE

The OneTouch Button Panel also opens with the description of the
selected settings.

To Refresh the OneTouch 4.0 settings, click the

Refresh

button on

the OneTouch Properties window.

If you make changes in the OneTouch Properties window, then
click the

Apply

button, the information in the OneTouch panel

will update to show the new settings. See “Configuring the
OneTouch Buttons” on page 37 to change settings.

You can also click the tabs at the top of the OneTouch Properties
window to see the settings of the other buttons.

3. When you’re ready to scan, just click (not right-click) the button on

the Button Panel.

Important:

The OneTouch Properties window must be closed before

you can scan from the Button Panel.

The icon indicates the Destination
Application for this setting.

Your document will be scanned
with these settings.

Summary of Contents for OneTouch 9750
































































































































































Search results

Summary of Contents for OneTouch 9750

Reviews:

Related manuals for OneTouch 9750

Brands by name

Popular brands

Visioneer OneTouch 9750, User Manual

Search results

Summary of Contents for OneTouch 9750

Reviews:

Related manuals for OneTouch 9750

Brands by name

Popular brands