Vision 1330B, Owner'S Manual, Page: 7 / 48

Úåå+)2!-%+å).#
PAGER USAGE & CARE
02%#!54)/.3
Your 2-way pager is a delicate device that can be easily damaged by exces -
sive heat, direct sunlight for extended periods, humidy, dirt, oil and water.
Never emerse your pager in water. If it gets wet, remove the battery and
allow to dry thoroughly. Never drop your pager. Strong impact can break
the LCD and/or cause internal malfunction to occur. Rough handling of the
2-way pager is not covered under warranty!
#(!.').'å4(%å"!44%29
Pager batteries last an average of 2-3 months with normal use. When the
battery needs changing, the battery low icon will appear and the pager will
beep several times. Remove the old battery then press any button for 3 sec.
and release. Now insert the new battery. Do not lose the battery cover.
#/--5.)#!4)/.å2!.'%
Your pager’s range is adversely affected by RF noise. However, the typical
in-city range is often greater than 300m (>985ft), and normal range in the
country side (or any low RF noise area) can be as high as 600m (2,000ft.).
Please keep in mind, however, that if metal objects (coins in your pocket) or
even your hand touches or surrounds the antenna, range will be adversely
affected. Also, your proximity to high-power TV station antennas and or
powerful mobile phones will also limit range.
2%30/.3)6%.%33
It typically takes up to 8 seconds before your pager will be updated with
the alert status of the vehicle (such as when the siren goes off). During
this time, the pager may become less responsive to your button presses. In
addition, the pager will not receive updates while you are pressing any but-
ton. So for example, if you press Button-I too long, the system will arm, but
your LCD may not reflect the armed status. To update your pager, simply
disarm and arm again, pressing the button for a shorter time.
å./4% References to pager button-presses in this manual also pertain
to the 3-button transmitter (Buttons I, II or III only).