SPIRIT G XL 1-3 KVA - PF0.9 - UPS
www.visionups.com
20
than ½ second (shorter than 2 seconds), select the numerical value in accordance
with the «OPU» function. The provided voltages are 208V, 220V, 230V, 240V. You
can choose any of them by yourself (default is 220V).
③ Confirm the output voltage setting. After selection of the numerical value,
press and hold the function setting key
longer than ½ second (shorter than 2
seconds). The setting of the OPU-function is completed now and the numerical
value below «OPU» lights without flashing.
④ Exit the setting interface. Press and hold the function setting key
longer
than ½ second (shorter than 2 seconds), exit the setting interface and return to
main interface.
Battery pack
(EBP)
number &
type setting
① Enter the setting interface. Press and hold the function setting key
longer
than 2 seconds to reach the setting interface. Press and hold the scroll key
longer than ½ second (shorter than 2 seconds), select the function setting, choose
the battery setting interface. The letters «bAt» flash.
② Enter the battery setting interface. Press and hold the function setting key
longer than ½ second (shorter than 2 seconds). Then reach the battery setting
interface. The letters «bAt» stop flashing. The numerical value below «bAt»
flashes. Press and hold the scroll key
longer than ½ second (shorter than 2
seconds), select the numerical value in accordance with the real connected
battery strings.
③ Confirm the battery strings setting interface. After selection of the numerical
value, press and hold the function setting key
longer than ½ second (shorter
than 2 seconds). Now, battery strings setting is completed and the battery
capacity value below will flash.
④ Set the battery type in the same way.
⑤ Exit the setting interface. Press and hold the function setting key
longer
than ½ second (shorter than 2 seconds), exit the setting interface and return to
main interface.
Load
segment
setting
① Enter the setting interface. Press and hold the function setting key
longer
than 2 seconds to reach the setting interface. Press and hold the scroll key
longer than ½ second (shorter than 2 seconds), select function setting, choose the
battery setting interface. The letters «Seg1» flash.
② Enter the load segment setting interface. Press and hold the function setting
key
longer than ½ second (shorter than 2 seconds). Then reach the load
segment setting interface. The letters «Seg1» stop flashing. The numerical value
below «Seg1» flashes. Press and hold the scroll key
longer than ½ second
(shorter than 2 seconds), select the battery voltage (10.5V, 11.0V, 11.5V – default
is 10.5V).
③ Confirm the battery voltage setting for the shutdown of segment. After
selection of the numerical value, press and hold the function setting key
longer than ½ second (shorter than 2 seconds). The battery voltage setting for the
segment shutdown is completed now.
④ Exit the setting interface. Press and hold the function setting key
longer
than ½ second (shorter than 2 seconds), exit the setting interface and return to
main interface.
Automatic
battery test
setting
① Enter the setting interface. Press and hold the function setting key
longer
than 2 seconds to reach the setting interface. Press and hold the scroll key
longer than ½ second (shorter than 2 seconds), select the function setting, choose
the automatic battery test setting interface. The letters «Abt» flash.
② Enter the «Abt» setting interface. Press and hold the function setting key
longer than ½ second (shorter than 2 seconds). Then reach the setting interface of
«Abt». The letters «Abt» light a long time. The word «ON» (or «OFF») below
«Abt» will flash. Press and hold the scroll key
longer than ½ second (shorter
than 2 seconds) to determine the «Abt» function as used or as unused. If used,
the corresponding word is «ON», if unused the corresponding word is «OFF». It
can be determined by yourself.
③ Confirm the «Abt» setting interface. After selection of «ON» or «OFF», press
and hold the function setting key
longer than ½ second (shorter than 2
seconds). Now, the «Abt» setting function is completed and the word «ON» or
«OFF» below «Abt» lights without flashing.
