SPIRIT G XL 1-3 KVA - PF0.9 - UPS
www.visionups.com
19
4.4. Parameter Settings
The UPS has different setting functions. These settings can be done under any kind of UPS working mode. The applied settings
will take effect immediately if they correspond to standard guidelines. Below table describes how to set the UPS:
TABLE 6 – Parameter settings
Setting
function
(sequence
no.)
Setting procedure
Graphic
ECO mode
setting
① Enter the setting interface. Press and hold the function setting key
longer
than 2 seconds to reach the setting interface. The letters «ECO» flash.
② Enter the ECO setting interface. Press and hold the function setting key
longer than ½ second (but shorter than 2 seconds). The letters «ECO» stop to
flash. The «ON» (or «OFF») below ECO flashes. Press and hold the scroll key
longer than ½ second (shorter than 2 seconds) to determine whether the
activation or deactivation of the ECO function.
③ Confirm the ECO selection. After selecting «ON» or «OFF», press and hold the
function setting key
longer than ½ second (shorter than 2 seconds). The
setting of ECO function is completed now and the «ON» or «OFF» below «ECO»
lights without flashing.
④ If you choose «OFF», then continue at step 7, otherwise at step 5.
⑤ Set the ECO tolerance range. Press and hold the scroll key
or
longer
than ½ second (shorter than 2 seconds) to select the voltage range in percentage.
5%, +10%, +15%, +25% (default is +25%). Then press and hold the function
setting key
longer than ½ second (shorter than 2 seconds) to confirm the
selection.
⑥ Set the minus range in the same way.
⑦ After confirmation of the minus range, press and hold the function setting key
longer than 2 seconds to exit the setting menu.
Bypass
mode
setting
① Enter the setting interface. Press and hold the function setting key
longer
than 2 seconds to reach the setting interface. Press and hold the scroll key
longer than ½ second (shorter than 2 seconds) to select bPS setting. The letters
«bPS» will flash.
② Enter bPS setting interface. Press and hold the function setting key
longer
than ½ second (shorter than 2 seconds). The letters «bPS» stop flashing. The
«ON» (or «OFF») below bPS flashes. Press and hold the scroll key
longer than
½ second (shorter than 2 seconds) to determine the activation or deactivation of
the bPS function.
③ Confirm the bPS selection. After selecting «ON» or «OFF», press and hold the
function setting key
longer than ½ second (shorter than 2 seconds). The
setting of bPS function is now completed and the «ON» or «OFF» below «bPS»
lights without flashing.
④ If you choose «OFF», then continue at step 7, otherwise at step 5.
⑤ Set the bPS tolerance range. Press and hold the scroll key
or
longer
than ½ second (shorter than 2 seconds) to select the voltage range in percentage.
5%, +10%, +15%, +25% (default is +25%). Then press and hold the function
setting key
longer than ½ second (shorter than 2 seconds) to confirm the
selection.
⑥ Set the minus range in the same way.
⑦ After confirmation of the minus range, press and hold the function setting key
longer than 2 seconds to exit the setting menu.
Output
voltage
setting
① Enter the setting interface. Press and hold the function setting key
longer
than 2 seconds to reach the setting interface. Press and hold the scroll key
longer than ½ second (shorter than 2 seconds), select the function setting, choose
the interface for output voltage setting. The letters «OPU» will flash.
② Enter the output voltage setting interface. Press and hold the function setting
key
longer than ½ second (shorter than 2 seconds). Then reach the setting
interface of output voltage OPU. The letters «OPU» will light for a long time. The
numerical value below «OPU» will flash. Press and hold the scroll key
longer
