Vision Research Phantom v1211, Manual

Page: 19 / 88

Chapter 2: Quick Start Guides
13
via on-camera controls
Connect a suitable power supply (20-28VDC) to the
Primary DC Input connector, then set the power switch
to the ‘ON’ position.
Connect a suitable HD-SDI video monitor (not supplied)
to the ‘HD-SDI 1’ connector on the connector panel of the
camera.
Mount a Phantom CineMag II, if available. For detailed in-
struction see Chapter 7: Phantom CineMag & CineStation.
From any of the ‘Live’ screens; rotate the Menu knob to
display the ‘1/2 Camera’ menu.
Rotate the knob to the desired camera parameter, then
press the knob to select.
Rotate the knob, in ether direction, to change the selected
parameter, then press knob to confirm.
•
•
Set•‘Resolution’•to•the•required•Width•x•Height
•
•
Choose•the•required•‘Speed’•(frame•rate)•and•
‘Shutter’•(exposure•time).
•
•
Set•the•‘T’•(trigger•position)•at•the•beginning,•or•the•
end,•or•some•position•within•the•internal•memory
Press ‘B-REF’ button.
Mount camera onto suitable support
Attach and adjust appropriate lens
Power Up Camera
Setup Video Monitor
Attach Phantom CineMag II
Set Recording Parameters
Perform Black Reference
Black Refernce should be performed after all
recording parameters have been set