manualshive.com logo in svg

Vision Research Phantom v1211, Manual

Share
Download
Vision Research Phantom v1211 Manual Download Page 74

Phantom Ultrahigh-speed cameras Manual

68

sensor solutions

To simplify things, only specific resolutions are available 
from the camera menu. The choices are a variety of  
common resolutions and aspect ratios.

The resolution controls in PCC software are somewhat 
different, and allow more flexibility in choosing how  
the images are captured and output. First, the native 
resolution must be selected from the ‘Cine Settings /  
Resolution’ pull-down, however an output resolution can 
be set using the ‘Geometry & Overlays’ section of the 
‘Image Tools’ menu.

What is the difference 

between ‘Native’ and 

‘Cropped’ resolutions?

There are a variety of pre-set output resolutions available, 
or any value can be typed in and offset with the X & Y  
coordinates listed. Cropped or scaled resolutions set  
on the camera body will automatically set the ‘Crop & 
Resample’ parameters appropriately.

Summary of Contents for Phantom v1211

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands