Vision Fitness S7200HRT, Owner'S Manual, Page: 18 / 23

31 30
GENERAL
GENERAL
TROUBLESHOOTING YOUR HEART RATE MONITOR CHEST
STRAP
PROBLEM:
No pulse reading appears.
SOLUTION:
There may be a poor connection between the contact
pads and skin. Remoisten the contact pads.
SOLUTION:
Transmitter is not properly positioned; reposition the chest strap.
SOLUTION:
Verify that the distance between the transmitter and receiver is not
beyond the recommended range of 36 inches.
PROBLEM:
There is an erratic pulse rate.
SOLUTION:
Chest strap is too loose; readjust according to directions.
NOTE:
It is possible that heart rate monitors will not function
properly on some people for a variety of reasons. It may be necessary to
experiment with the fit and position of the chest strap. Outside interference
sources such as computers, motors, electric dog fences, home security
systems, remote controls, CD players, fluorescent lights, etc., may cause problems for
heart rate monitors.
TROUBLESHOOTING
Our Suspension Elliptical Trainers are designed to be reliable and easy to use. If,
however, you have a problem, these troubleshooting steps may reveal the cause.
PROBLEM:
The console does not light up.
SOLUTION:
Check to make sure the power switch located on the backside of the
console is turned on.
SOLUTION:
Make sure the power cord is plugged into the base of the Suspension
Elliptical Trainer, and the power switch located near the plug is on.
SOLUTION:
Make sure the wire harness is plugged into the back of the console.
PROBLEM:
You feel a thump or hitch in the stride motion.
SOLUTION:
Check assembly and tightness of all hardware.
SOLUTION:
Check the bolts and the bracket under the footplate.
NOTE:
If the above steps fail to remedy the problem, discontinue use, turn the
power off and contact your retailer.