Viscount Physis Organs Reference Manual Download

Page: 66 / 106

Viscount

Physis Organs

Reference Manual

When the copy is complete:

If there is a file with the same name in the same memory, the system will ask you to overwrite (the old file) or
rename (the new file).

Press [ENTER] to start saving:

N.B.:

The content of an overwritten file will be completely lost.

The system does not allow two .mid files on the same memory to have names beginning with the
same three characters.

Press [ENTER] to save and overwrite, or [EXIT] to cancel an go back to the name composition screen.

As stated above, the COPY function is also able to create two or more copies of the same file in the same
memory unit. It can be used to create backup files. To do so, select the copy function:

Summary of Contents for Physis Organs











































































































Search results

Summary of Contents for Physis Organs

Reviews:

Related manuals for Physis Organs

Brands by name

Popular brands

Viscount Physis Organs, Reference Manual

Search results

Summary of Contents for Physis Organs

Reviews:

Related manuals for Physis Organs

Brands by name

Popular brands