78
Viscount
Physis Organs
Reference Manual
Warning you that the overdubbing will be lost. Press [ENTER] to continue – and therefore discard the
recording – or [EXIT] to return to the previous screen.
Select ACCEPT or TRIM AND ACCEPT to move to the saving screen. Now it is possible to save the piece
with a different name.
Selecting PLAY or PLAY FROM LAST OVD will activate the sequencer play mode. Press [EXIT] to return
to the previous screen.
12.3 PLAY OPTIONS OF THE SEQUENCER (PLAY OPTIONS menu)
Select the PLAY OPTIONS field. The menu offers several options:
Press [EXIT] to quit the screen. The display will show:
o
TRANSPOSER:
sets a semitone transposition on the pieces played by the sequencer.
o
SONG LOOP:
select YES to automatically loop any song.
o
LIST AUTOPLAY:
select YES to automatically play the next song when the previous is over, without
pressing the [FIELD ?] button. Only works with song lists.
o
LIST LOOP:
select YES to automatically loop a song list.
12.4 ERROR MESSAGES – SEQUENCER
FILESYSTEM ERROR
An error occurred while reading from the current memory unit. If the unit is a pen drive, try disconnecting
it and reconnecting it shortly thereafter. If nothing changes, try formatting your pen drive using a computer.
If the error occurs in the internal memory, try again, then get in touch with the technical assistance at e-mail
address service@viscount. Remember to always communicate the error message.
If these errors occur, before trying anything else:
-
If having problems with an USB pen drive, check that the pen is properly connected, formatted according
to the instructions in this chapter, that it is working and that the file in use is not corrupted.
-
If having problems with the internal memory, try again and then, if still having problems, contact the
technical support at the e-mail address [email protected] communicating the error message.
