manualshive.com logo in svg

Viscount Physis Organs, Reference Manual

Share
Download
Viscount Physis Organs Reference Manual Download Page 77

75

 

Viscount

 

Physis Organs

Reference Manual

OVERDUBBING

The internal sequencer record, play, but also overdub already recorded MIDI tracks. It can be done:
-

selecting a MIDI file from the current memory unit, from the RECORD function;

-

at the end of  a recording session, accessing the OVERDUB function.

The system will ask whether to substitute the settings (stops, coupling, tremulant, MIDI controls, general
controls) recorded in the track with the ones currently selected. Press [ENTER] to use the new settings or
[EXIT] to leave them as they are.

If  [EXIT] is pressed while in the save screen (i.e. when the recording has been acquired but not saved), the
system warns that the recording is about to be lost:

and that [ENTER] must be pressed to confirm that you wish to quit and delete the data acquired, or [EXIT]
to return to the save screen.

NOTE

When using a computer to rename files stored on the USB pen, remember that names can only
contain a maximum of 12 numbers and letters, which must all be lowercase. In add of this please
pay attention to do not delete the first three characters and the “_”.

previous screen, aborting the saving operation.
The following message confirms that the file has been saved:

The system will ask the same question, this time regarding the divisional volumes and expression pedals.

Summary of Contents for Physis Organs











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands