background image

52

Viscount 

Physis Organs

Reference Manual

10.2  CONTROLLING THE ACCESS TO THE ORGAN SETTINGS

(LOCK ORGAN function)

When necessary, organ configurations can be locked, so that only authorized users can access them.
The LOCK ORGAN function is designed just for this purpose. When active, combinations, Tutti, Crescendo
steps and Local Off  stops cannot be modified. Only volume, tuning and Organ Style options will be available.
The Record function of  the sequencer is also locked, so that recorded songs cannot be edited.
To recall this function, select the LOCK ORGAN field under the UTILITY & MIDI menu.

Press [VALUE +] and [VALUE -] to select the characters. Use the [FIELD  ] and [FIELD  ]  buttons to
move the cursor. Press [ENTER] to save the code, and [EXIT] to abort.
When the organ has been succesfully locked, the display shows the following message:

Here you can select which sections will be locked:

o

CMB MEMORIES:

 locks combination memories, Tutti, Crescendo and Plenum.

o

USER PARAMS

 (User Parameters)

:

 locks the functions under the menus: VOICES, SETUP, UTILITY

& MIDI, FILE MANAGER and Local Off  options.

o

SEQ RECORD:

 locks the sequencer’s Record function.

Now press [ENTER] to set a password:

To unlock the organ, allow the saving of  combinations and make the other adjustment functions accessible,
recall the UNLOCK ORGAN function under the UTILITY & MIDI menu (see next page).

Summary of Contents for Physis Organs











































































































Reviews: