manualshive.com logo in svg

Viscount Physis Organs, Reference Manual

Share
Download
Viscount Physis Organs Reference Manual Download Page 16

14

Viscount 

Physis Organs

Reference Manual

1. PEDAL Section

Contains pedal stops and manual-pedal couplers. The couplers available are:
-

Great to Pedal

-

Swell to Pedal

-

Choir to Pedal

2. SWELL section

Contains stops, couplers and tremolos of  Swell.

3. GREAT Section

Contains stops, couplers and tremolos of  Great. The couplers available are:

-

Swell to Great

-

Choir to Great (only three-manual models)

4. CHOIR section.

Stops, manual couplers and tremolos for Swell. The coupler available is:
-

Swell to Choir

For each rocker switch a different voice can be selected. You can also adjust the main sound-generation
parameters. Further information can be found on chapter 8.
Two tremolos are available for each section, and both can be activated through the [TREMOLO] stop or
draw-stop. Speed and depth of  both tremolos can be adjusted. Further information can be found on paragraph
9.1.

For some models, these sections also contain a [MIDI] control, to transmit MIDI-note codes to the MIDI
[OUT] port. It is also possible to play one or two orchestral voices. To do so, activate the desired voice
through the functions described on chapt. 8.3 and 8.5.  The list of  stops available to play orchestral voices
may change, according to the sound configuration of  the organ. Check the web page www.physisorgans.com/
download.asp for further information.

5. Light switch

On-off  button for the music stand and manuals lights.

6. Power switch

Instrument on/off  switch.

7. AMPLIFICATION section

Amplification controls.

-

[CONSOLE ON] switches on the instrument’s internal amplification system.

-

[EXT. SPEAKER ON]: this command activates the PROG.OUT and GEN. SUB outputs, in the rear
panel (point 25), in order to link external speakers to the instrument and use them to diffuse the
sound around the ambience.

8. CANCEL section

Cancel  buttons  which  allow  disabling  of    all  the  Reed  voices  ([REEDS]  tab)  and  the  Plenum
voices ([MIXTURE] tab). However, when a stop is deactivated through this control, the stop light is still
on.

9. MIDI section.

These controls, provided for each manual and the pedal board, allow transmission of   the note MIDIcodes
on the MIDI [OUT] port to be enabled and disabled. All the instrument’s other MIDI messages will
continue to be transmitted, even with the MIDI control off.

Summary of Contents for Physis Organs











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands