Dosing system eco-CONTROL EC200 DUO
Operating and maintenance instructions
Copyright ©
Version 1.4
9 / 43
4.8
Sources of danger due to Dosing system
- Very high dosing pressures can be produced, depending on the viscosity and the speed
of rotation, and this could result in unintended spurting out of the medium.
Check the
flow quantity in relation to the dosing needle used (needle cross-section).
- When it is started up for the first time and after being refilled, air bubbles that are
included in the medium could cause an uncontrollable spurting out of the outlet nozzle.
Only start production operation once the Dosing system has been completely
bled.
- Wear suitable protective clothing if chemical, corrosive or dangerous products are
being used.
Note and comply with the safety stipulations and the information from
the manufacturer.
Ensure sufficient bleeding or extraction of air. Take special safety
precautions if working with dangerous media, for example, provide eye flushing
facilities if working with corrosive chemicals.
Failure to follow the instructions given below can result in damage to the unit and
possible severe injury to persons in the vicinity.
Summary of Contents for PreeFlow eco-CONTROL EC200 DUO
Page 2: ...Item number 20202 print 21 2 12 ...
Page 44: ......