Dosing system eco-CONTROL EC200 DUO
Operating and maintenance instructions
Copyright ©
Version 1.4
5.6
Starting up
• Turns on the mains switch.
• Position the new mixer where necessary. The dosing system set is ready for operation.
5.6.1
Important settings
Some important settings must be made to ensure problem-free operation of the 2K-
dosing station. The following set-up makes the process easier:
- Mixer used
- Mixing ratio
- Pot life
- or flush time
- Pressure tolerance of the input pressure monitor, where used
5.7
Shutting down
The unit is shut down in reverse order of setting up.
5.8
The dosing programs and their areas of application
General
In order to achieve teh moste accurate results with the
eco-CONTROL EC200 DUO
, all
the main factors for a reproducible dosing operation can be set.
The dosing system must be recalibrated each time the medium is changed.
See 5.9, Calibrating page 17.
All the parameters of a dosing program can be saved. When using a memory card, 24
program slots are available for permanent storage.
Without the memory card, the data is stored temporarily on program slot 00. It is kept until
the dosing system is switched off.
The following values
can be defined,
depending on the
dosing program used:
Dosing program
Flo
w
quan
tity
Flo
w
ra
te
Dosin
g time
Sucked back qua
ntity
Suck back speed
Pause be
fo
re
Su
cki
ng back
Ma
te
rial de
nsity
Quantity program
x
x
x
x
x
x
Start / stop program
x
x
x
x
Time program
x
x
x
x
x
Summary of Contents for PreeFlow eco-CONTROL EC200 DUO
Page 2: ...Item number 20202 print 21 2 12 ...
Page 44: ......
