_______________________________________________________________________________________________________
_______________________________________________________________________________________________________
© Virtual Access 2018
GW6600 Series User manual
Issue: 1.7
Page 414 of 519
network.@interface[0].monitored=1
……
38.2.7.2
Enable interface status using package option
root@VA_router:~# uci export network
package network
config interface ‘WAN’
……
option monitored ‘1’
……
38.3
Reporting GPS location to Monitor
To allow Monitor to display a router GPS location, you can configure the GPS coordinates
to be sent in the heartbeat keepalive from the router.
GPS location is only available in supported hardware models.
Ensure monitor keepalive heartbeat is correctly configured as in section 38.2 above.
38.3.1
Configuration package used
Package
Sections
gpsd
gpsd
38.3.2
Configuring GPS location via the web interface
Select Services -> GPS. The GPS configuration page appears.
The web interface configures a gpsd section named core.
Figure 197: The GPS configuration page
Web Field/UCI/Package Option
Description
Web: Enable GPS
UCI: monitor.core.enabled
Opt: enabled
Enables GPS coordinates to be sent in the heartbeat keepalive to
Monitor.
0
Disabled.
1
Enabled.
Table 147: Information table for reporting GPS commands
